Fiber optic connectors are totally diverse from almost every other electronic or electrical connectors. They should be perfectly clean so that you can work. Many people don’t know this fact and could easily overlook its importance. Another thing is always that fiber optic connections aren’t as simple to bother shoot in situation and services information outage. Due to this, please learn carefully concerning how to clean a fiber optic connector as below.
Cleaning Method Choices
Fiber connector cleaning sometimes will get confusing since lots of methods are available and every single vendor states individuals are the most useful. Now let’s examine it individually.
:: Compressed Gas
Compressed air can also be known as “canned air”. It’s familiar with blow dust from fiber connector finish face.
Advantages: Minimal pricey and efficient for giant dry particles. Non-abrasive approach that won’t scratch the connector.
Disadvantages: Has minimum effect on particles below 3 microns across. And shown to get ineffective once the contamination includes oil, fingerprints, dried solvent residue, etc.
:: Lint-free wipe and solvent
It had been the initial developed way of cleaning fiber connectors. The first one used some type of lens paper, cloth and frequently solvent to clean. The most frequent solvent is IPA with a inclination to depart a residue since it dries progressively and dissolved/suspended solid remain behind.
Advantages: Cheap, work effectively if trained properly. New types of solvents which leave hardly any residue are gaining recognition.
Disadvantages: Difficult to depend on. Largely is determined by technician’s skill.
To properly clean fiber connectors while using wipe and solvent method, keep to the procedure below:
The First Step Employing a Kim Wipe and cleaning solvent, moisten the wipe by the very best in the solvent and push lower 3 occasions, this could saturate the wipe.
Second Step Once the wipe is saturated, placed on a bit surface getting another (dry) wipe.
Third Step Wipe the connector, finish face lower on moist wipe (this could remove a lot of the large contaminates). Follow by repeating process round the dry wipe, getting no less than 3 strokes per connector (more may be necessary)
Fourth Step Once complete, insert connector in to a optical microscope to make sure connector cleanliness. If connector does not pass visual inspection, repeat process from [Second Step – Fourth Step]
:: Swab and solvent
There’s 2 kinds of popular swabs inside the fiber optic industry: general purpose and special built.
The general purpose swabs are cheap but very difficult to depend on. The special built swabs are usually better however, this remains a really iterative approach. To properly clean fiber connectors, receptacles, adapters, as well as other fiber connection points while using swab and solvent cleaning method, keep to the procedure below:
The First Step Employing a cleaning swab and cleaning solutioin, moisten the swab by using it the very best in the solvent dispenser, place your finger inside the swab tip and push lower once, this could saturate the swab.
Second Step Recessed connection points: Once saturated, insert the moistened swab to the receptacle, adapter, or other connection point and rotate the finish forward and backward 1/4 turn 10 occasions while applying various pressure.
Third Step Uncovered connection points: Once saturated, rotate the finish 10 revolutions across the connector while applying various pressure.
Fourth Step Once complete, insert connector in to a optical microscope to make sure connector cleanliness. If connector does not pass visual inspection, repeat process from [Second Step
:: Connector Reel cleaner
Two primary brands exist in the marketplace for reel connector cleaners: Cletop and Optipop. There are other brands available while not as fashionable as these two.
The reel cleaner features a ratcheting mechanism, sliding dust cover, resilient pad, and replace tape reel. To properly clean fiber connectors while using Cletop cleaning system, keep to the procedure below: